Charge Control

Charge Control

« Previous12345Next »

Wind Generator Controller, Wind Turbine Charge Controller

Wind Generator Controller, Wind Turbine Charge Controller

A charge controller or regulator is vital for any wind Generator used to charge a battery bank.A typical wind Generator charge controller constantly monitors the battery voltage. If that voltage approaches a set maximum (the float voltage) then the controller turns on a dump load (aka shunt) which dissipates excess power to prevent it from over-charging the batteries.Buy China Cheap price grid tie wind Generator controller and stand alone wind Generator Controller here. 

Wind Generator Controller Feature:

3KW~20KW small wind generator controllers developed by us are intellectual controllers with the appliance of computer chip, anemoscope and dogvane to achieve the functions of generator control, protection and rectification.

Wind Generator Controller circuit should be totally separated from the main circuit (circuits excluding controller circuit). The controller can be grounded (e.g. enclose grounded) or negatively grounded.
1)  The real-time wind speed, voltage and current can be shown through numeral display function.
2)  Over-charge and over-wind-speed protections
3)  Cooperate with dogvane and yawing system to face wind correctly.
4)  Hall current transformer for checking current.
5)  Prevent cables from enwinding intellectually.

 

Wind Generator Controller Specification:

Model SKY-3KW SKY–5KW SKY–10KW SKY–20KW  Wind speed (yawing
 30 degrees ) (m/s) 12 12 12 13  Wind speed (yawing 
 60 degrees ) (m/s) 15 15 15 16  Wind speed (yawing 
 90 degrees ) (m/s) 18 18 18 20  Yawing voltage(V)   off-grid 290 290 290 450   on-grid 340 340 340 450  Load-absent   
 voltage (V)   off-grid 310 310 310 450   on-grid 350 350 350 450  Yawing-resume 
 voltage (V)   off-grid 280 280 280 420   on-grid 300 300 300 420  Load-resume 
 voltage (V)   off-grid 290 290 290 420   on-grid 310 310 310 420  Dump-loader power (W) 5000 8000 15000 30000  Low-voltage value (V) 210 210 210 315  Over speed (m/s) 18 18 18 20  Controller size(mm) 800*600*180  Dump loader size(mm) 840*600*200  Controller weight(kg) 27kg  Dump loader weight(kg) 24kg 28kg 33kg 33kg  Warranty 2 Years


About the Author

wind turbine | Angel wind turbine  |  AEOLUS Wind Turbine

Wind Turbine Charge Controller Demonstration