solar powered cameras

solar powered cameras

« Previous12345Next »

Have you ever seen charger portable solar power? It's not so widely used in our daily life.Now I'd like to introduce you the item.It is an innovative process for the provision of laptops for photovoltaics, Netbooks, laptops, MP3 players charged by the sun.The instructions are as follow:

1. Start small to understand what you are doing and your path. Learn more about the solar cell, they are interested in using and reading the technical design of the surface. Basically, solar cells must be in an enclosure which is sealed against the elements, is to dust and condensation on the cells, thereby reducing the power to prevent hard mounted.

2. Ascertain exactly what your benefits. If you're designing for a particular device, read the label on the device or power supply, it is necessary to indicate the voltage and watts to charge your device. If you try to multiply a charger for the design of the device, you need maximum power and performance of power-hungry device in your target audience. - We charge a significant player to multiple devices simultaneously.

3. Si you are for a single voltage / power combo, or 12 Volt 12 Watt design, the conversion of Watts to Amps is determined by the equation Amps = Watts / Volts:

For example, 12 volts = 1 amp watts/12 - so there is a design specification, you must build a device that will output 12 volts -

4. Read on parallel and series - which is not very complicated - basically, if you bind the "+" with a solar cell on the "-" the next solar cell and repeat your fickle a multiple number of cells is connected to another - that is, if each cell has 0.5 volts and 24 cells bind together like that, you have a drive that is connected in series and produces 12 volts (24 x 0.5) - this n is not performance multiply / current, only voltage. So if your cells output 0.5 volts and 10 watts output from your panel of 12 volts and 10 watts. To increase the number of watts you multiply panels connected with parallel lines, parallel to avoid the wire "+" from the other drives together and not binding on the plus and minus - "-" son together with the "- "son from the other plates together or are you just your plates. So if you tie two panels (each panel is connected in series) in parallel, you will now have a power of 12 volts and 20 watts. You can use this technique to combine cell panels to produce the desired output voltage / current / power per your specifications.

5. When the construction of an AC panel, add an inverter that converts to alternating current supplied and provides a clean sine curve for each device that you plug into the panel to work properly.

6. Solar cells can produce voltages dangerous to understand what you do before you start. Use of small cells and low voltage until you understand what you are doing. If you kill yourself, nobody is to blame except yourself, so do not try, if you do not understand what you are doing. Millions of solar panels has been built and very few people are dead, but you could not if we do not pay attention and understand what you are doing.

For more info, you can check our site http://www.Hootoo.com.

Solar Powered Wireless Security Camera - Part 2